On 1/22/07, Stefan Priebe - FH <studium@profihost.com> wrote:

quoted text
> I've an Asus A8V Mainboard which works wonderful with a 2.6.18.X kernel.
> But i cannot use the SATA Controller with a 2.6.19.x Kernel.

I also have an Asus A8V motherboard that cannot boot a newer kernel
because the SATA controller does not come up properly. I have tried
kernels 2.6.19.2 and 2.6.20-rc5 with no luck. It looks like later
kernels don't recognize the proper IRQ of the device as compared to
the 2.6.18 boot logs.

quoted text
> "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
> "ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
> mode"
> "ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part "
> "ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277"
> "ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277"
> "ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277"
> "ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277"

Similar output as above.


Does any one have any ideas?


Stephen
-
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/