Re: EXT3 problem in 2.6.21-rc4

Previous thread: Question Regarding The Radeon Framebuffer by Ronald on Tuesday, March 20, 2007 - 1:31 pm. (1 message)

Next thread: 2.6.21-rc4-mm1: init hangs on tty_mutex by Hugh Dickins on Tuesday, March 20, 2007 - 12:42 pm. (3 messages)
From: Rafał Bilski
Date: Tuesday, March 20, 2007 - 1:33 pm

> Witam,
Sprawdzałem przed chwilą na wszelki wypadek. Nic nie znalazł.
Tylko dlaczego fs się wysypał? Kiedy kupiłem tą płytę takie 
błedy były na porządku dziennym. I te spowodowane przez 
Longhaula też. Nigdy nie miałem podobnych problemów z ext3. 
Dysk przechodził z DMA na PIO i dalej wszystko działało bez 
problemu.

No bad blocks reported. In older kernels(~2.6.16) I had 
this error many times, but never filesystem was corruped. Disk 
was switching from DMA to PIO and everything was working later. 
Why this time so big file system damage? Is there some patch 
responsible, or just "bad luck"?

Pozdrawiam
Rafał


----------------------------------------------------------------------
Jestes kierowca? To poczytaj! >>> http://link.interia.pl/f199e

-

Previous thread: Question Regarding The Radeon Framebuffer by Ronald on Tuesday, March 20, 2007 - 1:31 pm. (1 message)

Next thread: 2.6.21-rc4-mm1: init hangs on tty_mutex by Hugh Dickins on Tuesday, March 20, 2007 - 12:42 pm. (3 messages)