> On Wed, Mar 21, 2007 at 09:37:52AM -0400, Daniel Yeisley wrote:
> > On Tue, 2007-03-20 at 13:26 -0700, Greg KH wrote:
> > > On Tue, Mar 20, 2007 at 01:25:38PM -0400, Daniel Yeisley wrote:
> > > > On Tue, 2007-03-20 at 11:00 -0700, Greg KH wrote:
> > > > > On Tue, Mar 20, 2007 at 12:18:24PM -0400, Daniel Yeisley wrote:
> > > > > > It has been mentioned before that large systems with a lot of PCI buses
> > > > > > have issues with the 64k I/O space limit. The ES7000 has a BIOS option
> > > > > > to either assign I/O space to all adapters, or only to those that need
> > > > > > it. A list of supported adapters that don't need it is kept in the
> > > > > > BIOS. When this option is used, the kernel sees the BARs on the
> > > > > > adapters and still tries to assign I/O space (until it runs out). I've
> > > > > > written a patch to implement a boot parameter that tells the kernel not
> > > > > > to assign I/O space if the BIOS hasn't.
> > > > >
> > > > > How prelevant are machines like this? And why are the BARs on these
> > > > > devices wrong?
> > > > >
> > > > I don't have any sales numbers, but I can tell you that our current
> > > > systems can have up to 64 PCI buses.
> > > >
> > > > I've been working with Emulex cards, and my understanding is that the
> > > > BARs on the devices aren't wrong, but we can't allocate 4k of I/O space
> > > > for each one. So we maintain a list in the BIOS of devices that don't
> > > > actually need I/O space and then don't assign it. I've tested an a
> > > > x86_64 system with 20+ adapters and saw all the disks attached without
> > > > any problems.
> > >
> > > Ah. Others are working on providing a fix for this too, but it is being
> > > done in the drivers themselves, not in the pci core. Look in the
> > > linux-pci mailing list archives for those patches (I don't think they
> > > every went into mainline for some reason, but I might be wrong...)
> > >
> > > I suggest you work with those developers, as they have the same issue
> > > that you are trying to solve here.
> > >
> >
> > I have seen some patches that make the drivers I/O port free here:
> >
http://lkml.org/lkml/2006/2/26/261
>
> Ah, yes, those are the ones.
>
> > I checked and they still aren't in the mainline.
>
> Poke the developer to get them there :)
>
> > I don't know that it matters though because I see all the disks attached
> > to the system regardless of whether or not the adapters get I/O space.
> > The real issue I have is with all the error messages I get at boot. I
> > see 40+ messages that say "PCI: Failed to allocate I/O
> > resource..." (from setup-res.c) when the kernel tries to allocate the
> > I/O space and can't. The modules load fine. I see all the disks just
> > fine. But that many error messages tends to raise concerns and causes
> > support calls from customers.
>
> If this isn't an issue for functionality, why not fix your BIOS then?
