login
Search
From: Rafael J. Wysocki <rjw@sisk.pl>
Adapt the skge driver to use the reworked PCI PM.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
drivers/net/skge.c | 38 +++++++++++---------------------------
1 file changed, 11 insertions(+), 27 deletions(-)
Index: linux-next/drivers/net/skge.c
===================================================================
--- linux-next.orig/drivers/net/skge.c
+++ linux-next/drivers/net/skge.c
@@ -149,24 +149,6 @@ static u32 wol_supported(const struct sk
return WAKE_MAGIC | WAKE_PHY;
}
-static u32 pci_wake_enabled(struct pci_dev *dev)
-{
- int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- u16 value;
-
- /* If device doesn't support PM Capabilities, but request is to disable
- * wake events, it's a nop; otherwise fail */
- if (!pm)
- return 0;
-
- pci_read_config_word(dev, pm + PCI_PM_PMC, &value);
-
- value &= PCI_PM_CAP_PME_MASK;
- value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
-
- return value != 0;
-}
-
static void skge_wol_init(struct skge_port *skge)
{
struct skge_hw *hw = skge->hw;
@@ -254,10 +236,14 @@ static int skge_set_wol(struct net_devic
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
- if (wol->wolopts & ~wol_supported(hw))
+ if ((wol->wolopts & ~wol_supported(hw))
+ || !device_can_wakeup(&hw->pdev->dev))
return -EOPNOTSUPP;
skge->wol = wol->wolopts;
+
+ device_set_wakeup_enable(&hw->pdev->dev, skge->wol);
+
return 0;
}
@@ -3842,7 +3828,7 @@ static struct net_device *skge_devinit(s
skge->speed = -1;
skge->advertising = skge_supported_modes(hw);
- if (pci_wake_enabled(hw->pdev))
+ if (device_may_wakeup(&hw->pdev->dev))
skge->wol = wol_supported(hw) & WAKE_MAGIC;
hw->dev[port] = dev;
@@ -4068,8 +4054,8 @@ static int skge_suspend(struct pci_dev *
}
skge_write32(hw, B0_IMSK, 0);
- pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ pci_prepare_to_sleep(pdev);
return 0;
}
@@ -4082,7 +4068,7 @@ static int skge_resume(struct pci_dev *p
if (!hw)
return 0;
- err = pci_set_power_state(pdev, PCI_D0);
+ err = pci_back_from_sleep(pdev);
if (err)
goto out;
@@ -4090,8 +4076,6 @@ static int skge_resume(struct pci_dev *p
if (err)
goto out;
- pci_enable_wake(pdev, PCI_D0, 0);
-
err = skge_reset(hw);
if (err)
goto out;
@@ -4132,8 +4116,8 @@ static void skge_shutdown(struct pci_dev
wol |= skge->wol;
}
- pci_enable_wake(pdev, PCI_D3hot, wol);
- pci_enable_wake(pdev, PCI_D3cold, wol);
+ if (pci_enable_wake(pdev, PCI_D3cold, wol))
+ pci_enable_wake(pdev, PCI_D3hot, wol);
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
--