* Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:

quoted text
> The problem seems to be that Frans has some PCI devices that are not 
> configured by the BIOS, and their BARs contain zero.  A PNP quirk 
> checks for overlaps of PCI devices and PNP devices, and those zero- 
> valued BARs of course conflict with the PNP motherboard devices that 
> describe legacy hardware.
> 
> Here's another approach based on section 3.5 of the PCI Firmware spec.
> It says:
> 
>   Since not all devices may be configured prior to the operating
>   system handoff, the operating system needs to know whether a
>   specific BAR register has been configured by firmware. The operating
>   system makes the determination by checking the I/O Enable, and
>   Memory Enable bits in the device's command register, and Expansion
>   ROM BAR enable bits. If the enable bit is set, then the corresponding
>   resource register has been configured.
> 
> So instead of checking whether the BAR contains zero, the patch below
> checks the I/O, Mem, and ROM BAR enable bits to determine whether a
> BAR is enabled.

cool! Looks like a pretty significant fix, for all sorts of legacy 
devices. Worth backporting?

	Ingo
--
unsubscribe notice
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/