The upload speed problem about the modem

Previous thread: Re: [Bugme-new] [Bug 12301] New: Fingerprint reader doesn't respod after the first use by Andrew Morton on Friday, December 26, 2008 - 1:59 pm. (2 messages)

Next thread: Re: [Bugme-new] [Bug 12301] New: Fingerprint reader doesn't respod after the first use by Erik Ekman on Sunday, December 28, 2008 - 3:53 am. (17 messages)
From: fangxiaozhi 00110321
Date: Saturday, December 27, 2008 - 1:12 am

Dear Greg:
 
    I have the upload speed problems about the data card modem.
 
    For the data card modem we used, it can support the upload speed up to 5.76Mbps and download speed up to 7.2Mbps on the Windows OS.
 
    And on the Linux OS, such as OpenSuse or Debian, we load the kernel usb serial driver "option.c" for the modem, and  we can get the download speed up to 7.2Mbps.
    But no matter what we do, the upload speed will still be 1.5Mbps, but not 5.76Mbps. And I don't know why it is 1.5Mbps, but not 5.76.
 
    Can you help me to find what results in this?
 
    Thanks very much.
 
Best Regards,
 
Franko Fang
2008-12-27

******************************************************************************************
 This email and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained here in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this email in error, please notify the sender by phone or email
 immediately and delete it!
 *****************************************************************************************
--

From: Greg KH
Date: Saturday, December 27, 2008 - 9:53 am

It is because no one ever actually tried to make it faster.  I recently
added a patch to my queue to be included in 2.6.29 to do just this, it
can be found at:
	http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/gregkh-04-usb/usb-opti...

If you could try that out and let me know if you can reach the maximum
speed of your device, I would appreciate it.

thanks,

greg k-h
--

From: Shivdas Gujare
Date: Wednesday, January 14, 2009 - 8:03 am

HI fangxiaozhi,

How do measured exact upload/downlink speed ? Few days back, I tried
to measure it from command line for USB modems, and had to use only
wget.
Are you following/using any other tool?

Thanks and Regards,
--

From: Greg KH
Date: Wednesday, January 14, 2009 - 8:47 am

You also might want to also try 'netperf' as it can measure lots of good
network statistics:
	http://www.netperf.org/netperf/NetperfPage.html

thanks,

greg k-h
--

Previous thread: Re: [Bugme-new] [Bug 12301] New: Fingerprint reader doesn't respod after the first use by Andrew Morton on Friday, December 26, 2008 - 1:59 pm. (2 messages)

Next thread: Re: [Bugme-new] [Bug 12301] New: Fingerprint reader doesn't respod after the first use by Erik Ekman on Sunday, December 28, 2008 - 3:53 am. (17 messages)