tpb and tphdisk are only for thinkpads with apm not acpi...

On 5/27/07, Don Scott <don.scott@gmail.com> wrote:
quoted text
> I have setup an MSDOS partition for tphdisk:
>
> $ sudo fdisk sd0
> Disk: sd0       geometry: 5168/240/63 [78140160 Sectors]
> Offset: 0       Signature: 0xAA55
>         Starting       Ending       LBA Info:
>  #: id    C   H  S -    C   H  S [       start:      size   ]
> ------------------------------------------------------------------------
>  0: 16    0   1  1 -  346 159 63 [          63:     5241537 ] OS/2 hidden
>  1: 00    0   0  0 -    0   0  0 [           0:           0 ] unused
>  2: 00    0   0  0 -    0   0  0 [           0:           0 ] unused
> *3: A6  346 160  1 - 2933 223 63 [     5241600:    39119472 ] OpenBSD
>
> $ sudo disklabel sd0
> # Inside MBR partition 3: type A6 start 5241600 size 39119472
> # /dev/rsd0c:
> type: SCSI
> disk: SCSI disk
> label: HTS541040G9SA00
> flags:
> bytes/sector: 512
> sectors/track: 63
> tracks/cylinder: 240
> sectors/cylinder: 15120
> cylinders: 5168
> total sectors: 78140160
> rpm: 3600
> interleave: 1
> trackskew: 0
> cylinderskew: 0
> headswitch: 0           # microseconds
> track-to-track seek: 0  # microseconds
> drivedata: 0
>
> 16 partitions:
> #             size        offset  fstype [fsize bsize  cpg]
>  a:        163296       5241600  4.2BSD   2048 16384    1 # Cyl   346*-
> 357*
>  b:       2096640       5404896    swap                   # Cyl   357*-
> 496*
>  c:      78140160             0  unused      0     0      # Cyl     0 -
> 5167
>  d:        163296       7501536  4.2BSD   2048 16384    1 # Cyl   496*-
> 506*
>  e:       2096640       7664832  4.2BSD   2048 16384    1 # Cyl   506*-
> 645*
>  f:      12581856       9761472  4.2BSD   2048 16384    1 # Cyl   645*-
> 1477*
>  g:      16776144      22343328  4.2BSD   2048 16384    1 # Cyl  1477*-
> 2587*
>  i:       5241537            63   MSDOS                   # Cyl     0*-
> 346*
>
> I've created a save2dsk.bin file:
>
> $ ls -l
> /mnt/
>
> total 5240832
> -rwxr-xr-x  1 root  wheel  2683305984 May 27 17:31 save2dsk.bin
>
> I have tpb set to run as a daemon from ~/.xinitrc. The volume mute/down/up
> buttons work, but none of the Fn buttons do except for the thinklight.
> On-screen display also does not work. Is this something I can fix with a
> simple configuration change?
>
>  Here is some information about my hardware. Thanks for any advice.
>
> $ sysctl hw
> hw.machine=i386
> hw.model=Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class)
> hw.ncpu=2
> hw.byteorder=1234
> hw.physmem=2137419776
> hw.usermem=2137407488
> hw.pagesize=4096
> hw.disknames=sd0
> hw.diskcount=1
> hw.sensors.acpitz0.temp0=49.05 degC (zone temperature)
> hw.sensors.acpitz1.temp0=47.05 degC (zone temperature)
> hw.sensors.acpibat0.volt0=14.40 VDC (voltage)
> hw.sensors.acpibat0.volt1=14.85 VDC (current voltage)
> hw.sensors.acpibat0.watthour0=73.24 Wh (last full capacity)
> hw.sensors.acpibat0.watthour1=3.66 Wh (warning capacity)
> hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity)
> hw.sensors.acpibat0.watthour3=20.38 Wh (remaining capacity), OK
> hw.sensors.acpibat0.raw0=1 (battery discharging), OK
> hw.sensors.acpibat0.raw1=18047 (rate)
> hw.sensors.acpiac0.indicator0=Off (power supply)
> hw.sensors.acpidock0.indicator0=Off (not docked)
> hw.sensors.aps0.temp0=50.00 degC
> hw.sensors.aps0.temp1=50.00 degC
> hw.sensors.aps0.indicator0=On (Keyboard Active)
> hw.sensors.aps0.indicator1=Off (Mouse Active)
> hw.sensors.aps0.indicator2=On (Lid Open)
> hw.sensors.aps0.raw0=495 (X_ACCEL)
> hw.sensors.aps0.raw1=502 (Y_ACCEL)
> hw.sensors.aps0.raw2=495 (X_VAR)
> hw.sensors.aps0.raw3=502 (Y_VAR)
> hw.cpuspeed=1996
> hw.setperf=0
> hw.vendor=LENOVO
> hw.product=1709G3U
> hw.version=ThinkPad X60
> hw.serialno=LVD6250
> hw.uuid=7ac062e0-711a-11db-80c2-db36273570d5
>
> and a dmesg:
>
> OpenBSD 4.1-current (GENERIC.MP <http://generic.mp/>) #3: Sat May 26
> 13:17:13 PDT 2007
>   root@x60.hyper-meta.net:/usr/src/sys/arch/i386 /compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
>
> real mem  = 2137419776 (2038MB)
> avail mem = 1943982080 (1853MB)
> using 4278 buffers containing 106995712 bytes (104488K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+ BIOS, date 04/18/07, BIOS32 rev. 0 @ 0xfd690,
> SMBIOS rev. 2.4 @ 0xe0010 (67 entries)
> bios0: LENOVO 1709G3U
> pcibios0 at bios0: rev 2.1 @ 0xfd620/0x9e0
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #22 is the last bus
> bios0: ROM list: 0xc0000/0xea00! 0xdc000/0x4000! 0xe0000/0x10000!
> acpi0 at mainbus0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT
> SSDT
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpi device at acpi0 from table DSDT not configured
> acpi device at acpi0 from table FACP not configured
> acpi device at acpi0 from table SSDT not configured
> acpi device at acpi0 from table ECDT not configured
> acpi device at acpi0 from table TCPA not configured
> acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 166 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2
> GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
>
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: duplicate apic id, remapped to apid 2
> acpi device at acpi0 from table MCFG not configured
> acpihpet0 at acpi0 table HPET: 14318179 Hz
> acpi device at acpi0 from table BOOT not configured
> acpi device at acpi0 from table SSDT not configured
> acpi device at acpi0 from table SSDT not configured
> acpi device at acpi0 from table SSDT not configured
> acpi device at acpi0 from table SSDT not configured
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 0 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus 4 (EXP2)
> acpiprt5 at acpi0: bus 12 (EXP3)
> acpiprt6 at acpi0: bus 21 (PCI1)
> acpiec0 at acpi0: EC__
> acpicpu0 at acpi0: CPU0:
> acpicpu1 at acpi0: CPU1:
> acpitz0 at acpi0, critical temperature: 127 degC
> acpitz1 at acpi0, critical temperature: 97 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0: model: 93P5029 serial:   437 type: LION oem: SANYO
> acpibat1 at acpi0: BAT1: not present
> acpibat2 at acpi0: BAT2: not present
> acpiac0 at acpi0: AC unit offline
> acpidock0 at acpi0: GDCK: not docked (0)
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130c2406000613
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 1000 MHz (1004 mV): speeds: 2000, 1000 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03: aperture at
> 0xee100000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 2
> int 17 (irq 11)
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Analog Devices AD1981HD (rev. 2.0), HDA version 1.0
> azalia0: RIRB time out
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
> pci1 at ppb0 bus 2
> em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00: apic 2
> int 16 (irq 11), address 00:16:d3:2f:f1:6d
> ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02
> pci2 at ppb1 bus 3
> wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2
> int 17 (irq 11), address 00:18:de:63:cc:4a
> ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
> pci3 at ppb2 bus 4
> ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02
> pci4 at ppb3 bus 12
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 16
> (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 17
> (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
> (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 19
> (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 19
> (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0
> uhub0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> uhub0: 8 ports with 8 removable, self powered
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xb4: apic 2 int 16
> (irq 11)
> "Ricoh 5C552 Firewire" rev 0x09 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x18: apic 2 int 18
> (irq 11)
> sdmmc0 at sdhc0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
> disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 ignored (disabled)
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI SATA" rev 0x02: AHCI
> 1.1: apic 2 int 16 (irq 11)
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, HTS541040G9SA00, MB2I> SCSI2 0/direct
> fixed
> sd0: 38154MB, 4864 cyl, 255 head, 63 sec, 512 bytes/sec, 78140160 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int
> 23 (irq 11)
> iic0 at ichiic0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4
> uhub4: Intel UHCI root hub, rev 1.00/1.00, addr 1
> uhub4: 2 ports with 2 removable, self powered
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> ugen0 at uhub4 port 2
> ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a swap on sd0b dump on sd0b