quoted text > Hi again.
>
> Sometimes I get the following:
>
> OpenBSD 4.5 (GENERIC.MP) #2133: Sat Feb 28 15:02:16 MST 2009
> deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2143023104 (2043MB)
> avail mem = 2069721088 (1973MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf7250 (44 entries)
> bios0: vendor Dell Inc. version "A10" date 07/17/2009
> bios0: Dell Inc. Inspiron 1545
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP HPET APIC MCFG SLIC SSDT
> acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0)
> USB4(S0) USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3)
> RP02(S3) RP03(S3) RP04(S3) RP05(S3) RP06(S3) LID_(S3) PBTN(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.34 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: apic clock running at 265MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG
> cpu1: 3MB 64b/line 8-way L2 cache
> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 3 (PCIE)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 11 (RP01)
> acpiprt3 at acpi0: bus 12 (RP02)
> acpiprt4 at acpi0: bus 9 (RP03)
> acpiprt5 at acpi0: bus -1 (RP04)
> acpiprt6 at acpi0: bus 13 (RP05)
> acpiprt7 at acpi0: bus -1 (RP06)
> acpiprt8 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: C3
> acpicpu1 at acpi0: C3
> acpitz0 at acpi0: critical temperature 105 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "DELL Y823G9" serial 591 type LION oem "SMP"
> acpivideo at acpi0 not configured
> acpivideo at acpi0 not configured
> acpivideo at acpi0 not configured
> cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617092006000920
> cpu0: using only highest and lowest power states
> cpu0: Enhanced SpeedStep 2400 MHz (1212 mV): speeds: 2400, 1600 MHz
> pci0 at mainbus0 bus 0: configuration mode 1
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 2 int 16 (irq 0)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 vendor "ATI", unknown product 0x9552 rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2
> int 20 (irq 11)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2
> int 21 (irq 10)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2
> int 22 (irq 7)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2
> int 22 (irq 7)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03:
> apic 2 int 21 (irq 10)
> azalia0: codecs: IDT 92HD71B7
> audio0 at azalia0
> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 2
> int 16 (irq 0)
> pci2 at ppb1 bus 11
> ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 2
> int 17 (irq 0)
> pci3 at ppb2 bus 12
> iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5100AGN" rev 0x00: apic
> 2 int 17 (irq 5), MIMO 1T2R, MoW, address 00:22:fb:9b:6f:62
> ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 2
> int 18 (irq 0)
> pci4 at ppb3 bus 9
> mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8040" rev 0x13,
> Yukon-2 FE+ (0x0): apic 2 int 18 (irq 10)
> msk0 at mskc0 port A: address 00:25:64:52:74:2d
> eephy0 at msk0 phy 0: 88E3016 10/100 PHY, rev. 0
> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 2
> int 16 (irq 0)
> pci5 at ppb4 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2
> int 20 (irq 11)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2
> int 21 (irq 10)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2
> int 22 (irq 7)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2
> int 20 (irq 11)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci6 at ppb5 bus 3
> pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x2919 rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 2
> int 18 (irq 10), AHCI 1.2
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, ST9160314AS, 0003> SCSI3 0/direct fixed
> sd0: 152627MB, 512 bytes/sec, 312581808 sec total
> cd0 at scsibus0 targ 1 lun 0: <Optiarc, DVD+-RW AD-7560S, SD05> ATAPI
> 5/cdrom removable
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic
> 2 int 17 (irq 5)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> /dev/ksyms: Symbol table not valid.
> mtrr: Pentium Pro MTRR support
> umass0 at uhub1 port 3 configuration 1 interface 2 "ZTE, Incorporated
> ZTE CDMA Technologies MSM" rev 2.00/0.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <ZTE, MMC Storage, 2.31> SCSI2 0/direct removable
> sd1: 3782MB, 512 bytes/sec, 7745536 sec total
> umass1 at uhub0 port 5 configuration 1 interface 0 "Generic
> USB2.0-CRW" rev 2.00/58.88 addr 2
> umass1: using SCSI over Bulk-Only
> scsibus2 at umass1: 2 targets, initiator 0
> sd2 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
> 0/direct removable
> sd2: drive offline
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Sonix Technology
> Co., Ltd. Integrated_Webcam_1.3M" rev 2.00/94.29 addr 3
> video0 at uvideo0
> softraid0 at root
> root device: sd0a
> swap device (default sd0b):
> root on sd0a swap on sd0b dump on sd0b
>
>
> usbdevs -v
>
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> port 3 powered
> port 4 powered
> port 5 addr 2: high speed, power 500 mA, config 1,
> USB2.0-CRW(0x0158), Generic(0x0bda), rev 58.88, iSerialNumber
> 20071114173400000
> port 6 addr 3: high speed, power 168 mA, config 1,
> Integrated_Webcam_1.3M(0x63ee), Sonix Technology Co., Ltd.(0x0c45),
> rev 94.29
> Controller /dev/usb1:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> getdevicedesc: ioctl: Input/output error
> port 3 addr 2: high speed, self powered, config 1, product
> 0x0031(0x0031), Qualcomm Inc.(0x19d2), rev 0.00
> port 4 powered
> port 5 powered
> port 6 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb4:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
> Controller /dev/usb5:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> Intel(0x8086), rev 1.00
> port 1 powered
> port 2 powered
>
>
>
I do have this modem working on linux. The problem with it is that, when
you plug it in, it is detected as a cdrom device. On linux I use a
program called usb_modeswitch. It changes the mode of operation of the
device by issuing some usb commands. I guess you would have to implement
the same thing for OpenBSD. There is really no way around this.
My regards,
--
Giancarlo Razzolini
Linux User 172199
Red Hat Certified Engineer no:804006389722501
Verify:https://www.redhat.com/certification/rhce/current/
Moleque Sem Conteudo Numero #002
OpenBSD 4.5
Ubuntu 9.04 Jaunty Jackalope
4386 2A6F FFD4 4D5F 5842 6EA0 7ABE BBAB 9C0E 6B85
