2010/1/12 FRLinux <frlinux@gmail.com>:
quoted text
> On Tue, Jan 12, 2010 at 6:05 PM, Marcin <migork@gmail.com> wrote:
>> However, it hangs later on just after printing out following lines:
>>
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> mem address conflict 0xff000000/0x1000
>> pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
>> "Intel E7520 Error Reporting" rev 0x0c at pci0 dev 0 function 1 not configured
>> ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
>
> Yup, same error here, precisely at that line.
>
> Just to confirm that we have the same issue, can you try disabling
> ppb* on boot -c then see if it goes to the login prompt?
>

Was even worse for me here, as although disabling ppb* makes the
kernel go slightly further, it has a nasty side effect of disabling
scsi controllerl.

However, I have just checked out and compiled -current and can confirm
the issue is gone - machine booted and all network interfaces are
accessible.

Many thanks to everyone involved in fixing that!

Regards,
Marcin